During the process of feeding our wire to the metallization machine, we recommend holding the superficial tower by hand to avoid the spring effect (where the tower is out of place). Refer to Image 1.4, for the correct way to hold the tower.
To avoid the spring effect, refer to Image 1.1
Avoid cross wires in the feeding process
Avoid dropping the bobbin during handover
– which may cause the coil to break
For the correct and wrong way to lift our coils, refer to Image 1.5
The product must be kept dry and protected from the elements (rain, etc.). It is recommended to keep it well in the original packaging to protect it from dust and other foreign substances
Our recommended shelf life for our aluminum wire is 6 months, we recommend using the material no later than 6 months for optimal quality.
It is advisable to wear safety glasses / googles and suitable gloves.
It is advisable to wear protective shoes.
It is recommended not stack rolls out of their original packaging. Dropping the roll may cause an impact.
Local security rules are in place and must be followed. The manufacturer will not be liable for any damage due to improper use of the submitted material.
FORM OFF SUPPLY
AJMet supplies Aluminium Wires in 2 forms of packaging: Bobbin and Coil. See Table 1.4 for Bobbin Types. For supplies in coil, please contact us for further details.